Crystal T-1-CPF Hydraulic Comparator Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Narzędzia Crystal T-1-CPF Hydraulic Comparator. Crystal T-1-CPF Hydraulic Comparator User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj

Podsumowanie treści

Strona 1 - Type T Series

Operation Manual for T-1, T-1-CPF, and Systems FType T Series

Strona 2 - Contents

Operation and Maintenance  8Type T Pump Operation ManualOperation and MaintenanceGENERATING PRESSURENote: It may be necessary to prime the pump

Strona 3 - Overview

Operation and Maintenance  9Type T Pump Operation Manual4 Zero the reference indicator and the device under test. 5 Close the vent valve.6 Operate

Strona 4 - FEATURES AND PARTS LISTS

Operation and Maintenance  10Type T Pump Operation Manual3 Pull the pump handle to the top of its stroke. 4 Open the vent valve.5 Pull out the val

Strona 5 - Ordering a Pump System

Operation and Maintenance  11Type T Pump Operation Manual12 Slowly pump two and one-half strokes, positioning the pump lever at approximately 45 deg

Strona 6

Connection Diagrams  12Type T Pump Operation ManualConnection DiagramsJOFRA REFERENCE INDICATORST-134 *15/16-20 Male/1/4" FNPTT-134 *15/16-

Strona 7 - Safety Instructions

Connection Diagrams  13Type T Pump Operation ManualCRYSTAL REFERENCE INDICATORS* These parts are included with the T-1-CPF pump. Additional par

Strona 8 - ASSEMBLY

Specications  14Type T Pump Operation ManualSpecificationsPressure RangesT-1 and T-1-CPF . . . . . . . . . . . . . . . . . . 0 to 1000 bar / 0 to 15

Strona 9 - Setup  7

Support  15Type T Pump Operation ManualSupportTROUBLESHOOTINGFailure to Pump XProblem: The pump fails to develop pressure when the hand lever

Strona 10 - Operation and Maintenance

Support  16Type T Pump Operation Manual7 Examine the port for air bubbles which may adhere to the threads or parts.Note: If air bubbles are presen

Strona 11 - To Prime the Pump

Support  17Type T Pump Operation Manual XTo Replace the Discharge Check Valve O-ring1 Remove the plug and O-Ring from the front of the pump body.2

Strona 12 - Type T Pump Operation Manual

ContentsOverview ... 1Introduction ...

Strona 13

Support  18Type T Pump Operation ManualFITTING KITS AND SPARE PARTSService Kits XT-1T-250 ...Buna N rebuild kitT-559 ...Vit

Strona 14 - Connection Diagrams

Support  19Type T Pump Operation ManualAPPENDIX A: ASSEMBLY DRAWINGS AND PARTS LISTS XFigure 1• Hydraulic Hand Pump Type T Assembly

Strona 15 - CRYSTAL REFERENCE INDICATORS

Support  20Type T Pump Operation Manual XFigure 1• Hydraulic Hand Pump Type T Assembly Parts List

Strona 16 - Specifications

Support  21Type T Pump Operation Manual XFigure 2 • Manifold Assembly and Parts List

Strona 17 - TROUBLESHOOTING

Support  22Type T Pump Operation ManualCONTACT USUnited KingdomTel +44 (0)1243 833 [email protected] +33 (0)1 30 68 89 40general.l

Strona 18 - Pump Does Not Hold Pressure

5104.D© 2014 AMETEK Incorporated8600 Somerset Drive, Largo, Florida 33773

Strona 19 - Support  17

Overview  1Type T Pump Operation ManualOverviewINTRODUCTIONThe Type T Series hand pump, mounted on a drip pan with a manifold assembly, is capa

Strona 20 - FITTING KITS AND SPARE PARTS

Overview  2Type T Pump Operation ManualFEATURES AND PARTS LISTSThe Type T Series hand pump may be ordered with either oil or a water/alcohol mi

Strona 21 - Support  19

Overview  3Type T Pump Operation ManualHydraulic Fluid Type T Series Pump Systems are only available delivered empty. You will still need to specify

Strona 22 - Support  20

Overview  4Type T Pump Operation ManualParts Included with Pump Systems for Crystal Reference IndicatorsSystem FFOV and FWV(T-1-CPF)Part Number Desc

Strona 23 - Support  21

Safety Instructions  5Type T Pump Operation ManualSafety InstructionsWARNINGS, CAUTIONS, AND NOTES !WARNINGS:• Do not connect any external pres

Strona 24 - WARRANTY

Setup  6Type T Pump Operation ManualSetupASSEMBLY1 Open the vent valve.2 Attach the pressure manifold to the pump body. Manifold Assembly

Strona 25 - © 2014 AMETEK Incorporated

Setup  7Type T Pump Operation Manual3 Close the vent valve.Note: If using the T-1-CPF, ll with test uid through the gauge connections. This may

Powiązane modele: Pump Systems

Komentarze do niniejszej Instrukcji

Brak uwag